Video Blog 035 - Locating a PCB short circuit (10 minute)
DISCLAIMER: This video is educational only, so if you decide to do the same yourself then you are on your own, I can't be held responsible for any problems/issues/damage/injury that may occur if you decide to follow this blog and try it yourself.
VIDEO BLOG
A 10 minute video showing a technique for locating a dead short on a circuit board using a multimeter.
We've all been there, a short circuit 'somewhere' on our PCB but it could be anywhere. This technique involves no pulling components just to see and no cutting tracks to try and isolate.
PCB = My own PDVS2 design
DMM = Keysight 34461A (6.5 digit)
