Google Ad

Donate to IanJohnston.com using PayPal here, or pledge a donation via Patreon here.
I like creating electronics related YouTube videos. I mostly buy faulty gear from Ebay and make a repair video of it, but it's expensive and so with your help maybe I can continue to do so. Your support would be greatly appreciated.


Video Blog #001 - Repair of Mastech MS7221 Volt/mA Calibrator

DISCLAIMER: This repair video is educational only, so if you decide to do the same yourself then you are on your own, I can't be held responsible for any problems/issues/damage/injury that may occur if you decide to follow this blog and try it yourself.

VIDEO BLOG

Repair of a Mastech MS7221 Volt/mA Voltage Current Calibrator (Source/Output Step DC 0-10V 0-24mA Tester Meter).

I purchased the MS7221 off Ebay as condition unknown/possibly faulty. I took a chance and bought it as these units are very useful for simulating 0-10vdc & 4-20mA signals. No instrument tech should be without one.

Video:

 

Schematic:-

Far from complete but shows the basics of the on/off button and psu front end.