Video Blog 070 - 861D Hot Air Station Modification
DISCLAIMER: This video is educational only, so if you decide to do the same yourself then you are on your own, I can't be held responsible for any problems/issues/damage/injury that may occur if you decide to follow this blog and try it yourself.
VIDEO BLOG
In this short video I make a much needed modification to my 861D Hot Air Station in order to keep the LCD backlighting on at all times.
UPDATE: Small mistake on the schematic......the series backlighting resistor is 330ohm, not 4K7.
Note: This station is basically a 'copy' of the original QUICK 861DW unit. There are simply loads of copies going around and with different versions/revs of Pcbs inside.
